Client Login
  English   Español


How to set up the Wireless Router or AP as a Bridge.

When you have a 2 network and you want to join them together, but using wires is almost impossible or not an option, then you can use the bridge mode. With this mode you can join two different networks and can share files, printers, etc.

To do this you first need to make sure the new router you are getting has that mode. The Advantek network Routers AWR-754GR and AWR-954GR support this mode. All Access Points support this mode (AWN-AP-54MR).

- First you have to enable the WDS setting.
- Then on the Wireless tab select the mode bridge.
- Now put the same SSID, channel and WEP as the main router. Make sure is exactly the same, if something is not the same it won't work.

After doing this the router will work as a bridge and you will be able to connect two different networks together and saher failes and printers.
If you have more questions feel free to email us at support@advanteknetworks.com

- How to set up the Wireless Router and AP as a Repeater
- How to set up the Wireless Router and AP as a Bridge
- How to Open Ports
- How to clone MAC address
Advantek Networks, Inc. 2526 Qume Dr. Unit #23 San Jose, CA 95131 T (408) 392 0768 F (408) 392 0769
Copyright © 2007 Advantek Networks, Inc. All rights reserved. Privacy Policy.
Advantek Networks and the Advantek Networks logo are trademarks or registered trademarks of Advantek Networks Inc. and its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Any illegal use in production and turnover of Advantek Netoworks logo and trademarks as well as its imitation, shall be considered as a violation of the trademark protection law.