|
|
 |
Advantek Networks AUP-204 is a USB 2.0 Hub with one upstream facing USB 2.0 port (Type B connector) and four downstream facing USB ports (Type A connector). AUP-204 uses advanced USB Hub Controller solution with complete set of industry standard features for high-speed data transfer.
This product is made in ISO9001 approved factory. AUP-204 Four-Port USB 2.0 PCI complies with FCC Part 15 regulations and CE approval.
|
|
|
| • |
Compliant with USB 2.0 & USB power management |
| • |
Compliant with Advanced Configuration and Power |
| |
Interface (ACPI), and OnNow |
| • |
Supports Bus-powered or self-powered capability |
| |
with the suspend mode |
| • |
USB Hub supports high-speed (480 Mbps), |
| |
full-speed (12 Mbps), and low-speed (1.5 Mbps) devices |
| • |
USB Hub supports up to 4 downstream facing ports, |
| |
Port 3 and 4 can be disabled if they are unused |
| • |
Supports individual or global over-current protection |
| • |
USB traffic indication (GoodLink LED) on the upstream |
| |
facing port |
|
|
|
|
Complies with USB Specification Rev. 2.0 and maximum data transfer rate up to 480 Mbits/s
USB ports support high-speed, full-speed, and low-speed devices
|
|
One upstream facing port with USB type B connector
Four downstream facing port with USB type A connectors
|
|
Operating temperature 0°C ~ 70°C
Humidity 5 % ~ 95 % (non-condensing)
Storage temperature -55°C ~ 125°C
|
|
Windows 98, 98SE, ME, 2000, XP
|
Minimum System Requirements
|
Pentium compatible processor 200 MHz and above
Minimum 32 MB RAM
Minimum 30 MB available hard disk space
CD-ROM drive
USB Connector
|
|
|
|
|
|
